Sealite 10A solar regulator
10amp Solar regulator for marine, camping and caravan and other outdoor installations
It can be connected to one or two solar panels with a combined current of up to 10 amps. It will charge a wide variety of lead Acid, SLA and Gel batteries from solar power. The fully sealed regulator works in two stages and switches on the negative side.
Connect the battery leads to the B terminals.
Connect the solar panel leads to the S terminals.
Observe correct polarity, negative to negative, positive to positive.
When the battery is connected the regulator will switch on to allow the solar panels to fully charge the battery to 14.2V then switch off. When the battery voltage drops below 13.4 V the regulator will switch to trickle charge, switching off at 13.8V. When the battery voltage drops below 12.4V the regulator will allow full charge to 14.2V again.
Full charge cut in 12.4V
Full charge cut out 14.2V
Trickle charge cut in 13.4V
Trickle charge cut out 13.8V
Max supply charge 10A
Supply current 3mA
Max cable diameter 4mm
Dimensions 7cm x 6cm x 3cm (including connector terminal)
PLEASE NOTE These are supplied unpackaged,, but are brand new and unused with a Sealite warranty